Category: Floor Lamp

Corner lamp from branches

The branches were mounted on a log. Small power led’s were placed on the branches. The remote unit controls 3 sets of lamps: Set-1 Set-2 Set-3 Set1-3: 2018-09-21...

Another floor lamp with the leaves

Installing LED stripes in between the two leaves: Mounting holes at the base log: Transformer and the power connections:   2018-08-19...

Floor lamp from Palmate Leaves

Mounting the LED onto the base log: Transformer and power connections: Varnishing the palm leaves Mounting the leaves to the base log and fixing by the ropes: Lighting: 2018-08-02...

Floor Lamp from a Log

Another log found in trash: The shell is completely removed: The bottles previously cut at different sizes were painted and ready: The necessary holes were drilled onto the log: The power cables coming from these holes were then passed thru some copper pipes and the other ends of the...

Floor Lamp with Magnets

This was an experimental work. The idea was to install led’s into the magnets so that two opposing leds will float. 2018-01-02  ...

Floor lamp with panel leds

4-part floor lamp. The wooden slices were drilled to allow the metal pipes as the legs. Also the circular holes for the panel leds were prepared underneath of each slice. The slices were glued to the legs and the power cable was brought to the bottom via one of...

Cork lamp

First the proper holes for the cable system was drilled: The flexible light arms were then prepared by wrapping a thin cable around a 2.5mm copper cable. The cables were terminated by a power led and installed inside a cork. The system was then installed onto a supporting log...

A floor lamp from bougainvillaea branches

The branches were peeled and stored for drying. They were tied together to form a strong column: The upper part was prepared by using 10mm rope wrapped around a standard socket: A wooden log was used as the support and the branches were mounted on this log: Finally the...